Overview of Okazaki Factory
Overview of Sasayama Manufacturing Dept.
Overview of Sasayama Manufacturing Dept.

Overview of Sasayama Manufacturing Dept.
Overview of Sasayama Manufacturing Dept.
Sasayama Manufacturing Dept. is geared for large manual castings and Furan sand process. One line is large casting line for over 10 tons per piece and the other is a medium-size casting line for castings in between 3 to 10 tons per piece.
The large casting line produces more than 16 cylinder frames for marine Diesel Engines a month with each piece weighing anywhere from 22 to 40 ton. This line also produces more than 15 pieces of large machine tool parts per month with each piece weighing over 10 tons. We have experience of producing large castings as heavy as 50 tons per piece and of 10m long by using EPS pattern.

The medium casting line produces 80 to 100 pieces per month of mainly machine tool parts of less than 10 tons per piece.
There are two 25-ton high frequency induction furnaces (each switchable between melting and holding modes) for melting. The melting capacity is about 100 tons a day.
There is a sand mixer switchable between 30-tons / 20-tons-per-hour capacity and 40m long plane surface for making mold in large casting mold line. Therefore, we are capable of making molds for long size flask of up to 11m long and up to 4800mm square flask.